with 1.5 rockers this would be fine... But on 1.7's (which is what we run stock) That would put your lift at over .640. Thats a little high for a 5.3.Originally Posted by Beatdown Z
with 1.5 rockers this would be fine... But on 1.7's (which is what we run stock) That would put your lift at over .640. Thats a little high for a 5.3.
Yes...good cam for a 6.0L. A 220/220 is pushing it for a 4.8L, but a higher (3200 and up) stall will be required.
+1
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
sorry, that was a typo, i just used use2bfo's post and changed the values. didn't notice the 1.5, so it's really not that big
Big slow mud truck with a TUNE!!!!!!
Posting Permissions
Reply With Quote
