Help!!!!

[GasGuzzler]

I replaced a pump on a 2000 today and tried to remove the sock in case you guys wanted to drive 43 miles one way to pick up a used part in Nocona tomorrow but I could only pop one of the two NIPPLES off the pump can. It's in my trash if you wanna drive 83 miles to pick it up.

LOL

Thanks for the P/N, NITROUS, I'll cross it in the morning.

[banker099]

dont bother, we just modified the bottom cup thing and put it back in...

[GasGuzzler]

BTW, there's another inlet screen on the pump inside the cup as well.

[banker099]

yeah, we put the one on the pump

[GasGuzzler]

Gm #88965386 Not sure if it will work but it's worth a try if you want to stay with the strainer.

My research shows the ACD TS1016/ GM 88965386 fits 04-07 (even though the picture shows not serviced). Just might work though.

[txarkitekt]

your walboro should have its own filter. use that one and modify bottom of bucket to allow fuel to get to pump

+1
Yeah, CAREFULLY cut out the bottom of the bucket which hold the pump--and the sock/filter. But don't cut the entire bottom out--make sure you leave enough of a cup for the pump to sit in. Also, peel back the black foam surround from the pump where the metal flange touches the pump. It needs a good touching connection. Also, make sure to put in the black o-ring!