dropin a 4wd

[1_fastsilverado]

I've only got a partial kit on mine...first remove the blocks in the back, free 2" down and uncrank the torsion bars as low as they go, about 1-1.5" down in the front...next for the back the easiest is to get the shackles whick give you 2" more on the lowest point. i'm planning on buying 3" drop spindles in the front and possibly doing the hangers in the back to get in pretty close to the ground. Make sure you get it realigned if you mess with the bars, or anything in the front for that matter. Good luck!

[Felix 89]

I'm sorry but 4wd's are to be lifted not lowered.

[DAmarcus28]

my Z71 had drop shackles, i removed the blocks and lowerded my torsion keys as far as they can go and it looks sweet but recently i bottomed out and im kinda screwed =)

[zeake]

I'm sorry but 4wd's are to be lifted not lowered.

:bsflag:

[nlawson5.3]

I'm sorry but 4wd's are to be lifted not lowered.

:wtf: