engine bracket questions for OBS 5.3 install

[hellfire_studios]

no the frame side mounts are fine its the brackets on the motor that I have one that is right and the driver side that is off by a half an inch that I believe might be different. unless some one can tell me for sure that the 350 mount has been the same since the late seventies...

About the air I could probably run something from classic auto air I would assume or make my own bracket. Sectioning the frame right there is always another option but not one that I would like to do as I think I would need to take out quite a bit and I dont want the truck to act different in a head on collision. (part of the down side of working in the collision industry, always thinking of that)

What year f body parts do I need for the oil pan? or does it matter?

Josh

[RedHeartbeat]

98-2002 fbody only.

I used the Street and Performance High right side a/c relocation setup that uses a Sanden 508 compressor. The come highly polished in aluminum or you can order them in chrome. You can do the same with the compressor and it looks trick instead of being hidden down low, more bling.