+ Reply to Thread
Results 1 to 10 of 21

Thread: Correct fuel line connections

Hybrid View

  1. #1
    Join Date
    May 2008
    Location
    Kentucky
    Posts
    144
    sounds good. I hope to make a thread of everything I've used during this swap once everything gets done. I'm awaiting another PCM and hopefully mine will be running.

    Like I said if your fuel filter and line looks like this one/or is factory then most likely its the same but with any used vehicle sometimes the previous owner doesn't put things back to factory. Just for your own satifaction you may want to take the adapter fittings off and measure them up to a chart just to make sure that is it.
    1996 GMC extended cab, 2003 5.3/auto

  2. #2
    Join Date
    Jun 2008
    Location
    SE Georgia
    Posts
    417
    Gotcha Ill do that tomorrow I am ordering the fuel rail adaptors, pushrods and tranny cooler from Summit tonight I will check that and place an order at JEGS for the lines and reducers.
    Tired ol' 5.7, 5.3 swap in progress
    Handle every stressful situation like a dog.
    If you can't eat it or hump it.
    Piss on it and walk away.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts