+ Reply to Thread
Results 1 to 10 of 42

Thread: Wiring..

Hybrid View

  1. #1
    Join Date
    Oct 2003
    Posts
    473
    I remember being TOTALLY lost when I had to begin the wiring too! LOL...Its not a good feeling not knowing where to go to learn, and UNDERSTAND the wiring to get these babys going. I went on E-Bay & bought Volume 2, of the Factory GM Service Manuel. There is a Volume 1 also, but that Volume covers mostly mechanical & body service, plus I'm cheap. Volume 2 has EVERYTHING you will need to easily figure out your wiring. It has all the diagrams that show each & every wire that exits your C-100 connector at the drivers side firewall, etc...which will help you to connect each dash gauge, A/C request wire, main keyed power wire, and on and on... Its simple after you have this book. I learned years ago that this is the only way to fly. Also, when your done, you can help others with simular questions.

  2. #2
    Join Date
    Oct 2003
    Posts
    473
    The thread titled "need help wiring!!", dated 5-17-08, has a good bit of info too.

  3. #3
    Join Date
    Jun 2008
    Location
    SE Georgia
    Posts
    417
    Quote Originally Posted by LS1GMCTruck View Post
    The thread titled "need help wiring!!", dated 5-17-08, has a good bit of info too.

    Is this book year model dependent?
    Tired ol' 5.7, 5.3 swap in progress
    Handle every stressful situation like a dog.
    If you can't eat it or hump it.
    Piss on it and walk away.

  4. #4
    Join Date
    Oct 2003
    Posts
    473
    Quote Originally Posted by aarolar View Post
    Is this book year model dependent?
    I'm refering to a thread here on this board.

  5. #5
    Join Date
    Oct 2003
    Posts
    473
    The GM Service Manuels are different for every/each model year. Your truck is a 1996, correct? Look on E-Bay for a 1996 Chevrolet/GMC C/K Service Manuel, Volume 2.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts