+ Reply to Thread
Results 1 to 10 of 30

Thread: Won't start after wired up

Hybrid View

  1. #1
    They sent instructions for the LS1 electric fan install.

    The other info was very vague, the answer may have been there but I didnt see it.
    Last edited by LSXmyford; 08-07-2008 at 05:41 PM.
    LSX conversions, so easy a caveman can do it.

  2. #2
    Join Date
    Jun 2007
    Location
    maine
    Posts
    1,458
    i spent hours trying to find out why mine wouldnt crank.... check your starter relay(should be gray i believe and there should be a purple, black, pink and orange i think?) in the fuse box in the engine bay and the little black wire that goes into it is a ground. mine wasnt grounded. as soon as i grounded it it fired... i must have unhooked it somewhere and not re connected it... took me 2 days to figure that out...also as greg said USE THE FACTORY STARTER SOLENOID WIRE unless you already cut it or something... its much easier.
    09 CREWCAB LTZ SILVERADO, 6.2, SIX SPEED, CAI,

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts