GMPP LS3 Hot Cam into a 2000

[SCIV]

Impressive 1st post!!!

[SS94S10]

I'll try for an impressive 2nd post. I'm an avid reader but never had an excuse to join. Now I just wanted so show and help the next guy.

I also did another truck at the same time with a couple buddies of mine. 2002 Reg cab short box 2wd. We pulled the 5.3L/4L60E out and replaced it with a build 427. Block was a SDPC L92 El Toro 427. Then we finished it off with Yella terra Rockers strapped to Trickflow's 235 Heads. Custom grind Comp Cam, Fast 42# Injectors, Fast's 92mm Intake ported to 95mm and a 95mm DBW Rev Xtreme T.B. Kept the truck accessories on this one. Man it's almost worth the money to use corvette accessories. Corvette accessories the A/C Compressor fought us. (Hit the Frame) With the truck accessories the stupid T.B. was hitting the belt cause we had to flip the T.B. upside down on the 427 to clear the alternator and space it from the manifold to clear the waterpump outlet.

Hooker Super Comp Ceramic Coated Headers into a 3.5" exhaust Mufflered with a Dynomax Ultraflow. Tranny was a Finishline Trans again. Stage 5. Yank 3600 Stall converter and same rear end. We haven't dyno'ed this truck yet either but it is an animal. 3rd gear is still as messy as first. Spinfest. May not look like it from the vid but we are hoping for 550RWHP. Very Healthy.

Image of 427 - Photobucket - Video and Image Hosting

Image of Lan's Truck - Photobucket - Video and Image Hosting

LansTruckVid-1.flv - Video - Photobucket - Video and Image Hosting

I have one more picture of the engine bay but it didn't want to transfer. I'll try to get it a bit later.