Cam recommendations for ls1 silverado..

[LS6_Silverado]

if you get yours from texas speed i would highly recomend getting the whole cam kit....

my cam is a 228/228 588/588 @ 112.... its a pig down low but the top is amazing... i used to have the 220/220 581/581 @ 112 and that was a really nice cam

Well thats not good for me because my truck is all ready a pig a low end. Would the 112 lsa make it better down low? Im leaning towards a 220 on 112 lsa, i need it to be good down low. Does anyone else have any cam recommendations for a good low end with 3.73's?

I fixed my a/c by i recheck all my connections and the actual a/c connector was shoved in the plastic housing so i took it off and rewired it.

Thanks

[txarkitekt]

Well thats not good for me because my truck is all ready a pig a low end. Would the 112 lsa make it better down low? Im leaning towards a 220 on 112 lsa, i need it to be good down low. Does anyone else have any cam recommendations for a good low end with 3.73's?

I fixed my a/c by i recheck all my connections and the actual a/c connector was shoved in the plastic housing so i took it off and rewired it.

Thanks

Yeah Brandon--Alan's cam would be good for your truck. Since you have the 243 heads (AWESOME!!!!), you can do that cam and back it up with a 3000 Tank TT stall. Do 7.4L Hardened Pushrods and PRC springs with that cam. You can get a cam kit that includes all of it from Texas Speed. Once you get all of that installed, your truck wil scream!!!!