+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15

Thread: exhaust sounds

  1. #1
    Join Date
    Mar 2004
    Posts
    139
    Yea I am about to get new exhaust an I was just wanting to know what kind of exhaust setup you guys are running? Post it up if you could, maybe even a sound clip if you have it. Thanks

    BTW, 01Thunder, I know I have asked you exhaust questions before but I forgot an so I was just wondering what kind of mufflers you are running? I thout they were flowmasters but I wasent to sure what kind of flows. An I was wondering if you have a clip of your exhaust or maybe a clip of you just racing or running your truck, just any clip that you can hear your exhaust good. Now that I have the money I am going to try an get some better exhaust. Thanks

  2. #2
    Join Date
    Oct 2003
    Location
    LaPorte TX
    Posts
    835

    I got an exhaust leak right now, but I bet I can find a clip of what it used to sound like

    1999 Pewter Z28
    Sold - 2001 Onyx Black Silverado Stepside "Thunder"

  3. #3
    Join Date
    Oct 2003
    Location
    LaPorte TX
    Posts
    835
    heres what it used to sound like.
    dual 40 series flowmasters, with an X-pipe dumped after the mufflers before the axle.
    http://www.imagestation.com/picture/sraid7...ed/fb3b5932.mpg

    and this is now
    http://www.imagestation.com/picture/sraid1...1d/f89015e1.mpg
    same set up, just with an exhaust leak
    right Flyer!

    1999 Pewter Z28
    Sold - 2001 Onyx Black Silverado Stepside "Thunder"

  4. #4
    Join Date
    Oct 2003
    Location
    LaPorte TX
    Posts
    835

    1999 Pewter Z28
    Sold - 2001 Onyx Black Silverado Stepside "Thunder"

  5. #5
    Join Date
    Dec 2003
    Posts
    188
    It says i'm not authorized to view those pages?!
    2003 Arrival Blue Silverado SS.....I just can't leave $hit alone.

  6. #6
    Join Date
    Oct 2003
    Location
    LaPorte TX
    Posts
    835
    you might have to right click and save as.
    see if that will work I will try another way whenI get a chance.

    1999 Pewter Z28
    Sold - 2001 Onyx Black Silverado Stepside "Thunder"

  7. #7
    Join Date
    Feb 2004
    Posts
    24
    I have the same set up as 01thunder only without the x-pipe and both are dumped in front of the passenger side tire.

    What I'd like to know is if you noticed any performance from the x-pipe because my exhaust guy said it wouldn't make any differance on my truck.
    1999 6.0, 2500. headers, True daul exhaust, K&N, 3:73's, locker, Nelson tune

  8. #8
    Join Date
    May 2004
    Location
    Pickerington, Ohio
    Posts
    123
    I have JBA shorty headers into stock cats and stock y-pipe into a 40 Series Flowmaster - 3" single inlet, dual 2.5" outlets dumped before the axle.

    Click Here for Videos and a Sound Clip

    2007c CCSB 2wd lowered 2/2 Stock!
    2002 RCSB 2wd H/C 5.3l T56
    LQ4, 243, 228R, Holley Hi Ram, 4L80e, 4.56 - in the works!

  9. #9
    Join Date
    Oct 2003
    Location
    LaPorte TX
    Posts
    835
    Originally posted by rideorange@Jun 13 2004, 01:12 PM
    I have the same set up as 01thunder only without the x-pipe and both are dumped in front of the passenger side tire.

    What I'd like to know is if you noticed any performance from the x-pipe because my exhaust guy said it wouldn't make any differance on my truck.
    what I noticed was a recovery of some low end.
    when i went to the true dual setup, I lost some low end, and the x-pipe helped recover a little of it back, but with the stall it really feels good now

    1999 Pewter Z28
    Sold - 2001 Onyx Black Silverado Stepside "Thunder"

  10. #10
    Join Date
    Jun 2004
    Location
    pasadena, tx.
    Posts
    155
    so has any one heard the new super 40's? do they suond better andshould i go to a true duel or just single? perfomance and sound wise.
    04 4.8 FIPK, Pacesetter long tubes, dual exhaust with x-pipe and Dynomax race bullits, gutted cats, 160 therm, hypercrap programmer

    Future mods-p/p thottle body, 02 z06 cam, within the mth. 4:11 g80 soon after......just tryin to blow my tranny

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts