+ Reply to Thread
Results 1 to 5 of 5

Thread: StageII cam package?

Hybrid View

  1. #1
    Join Date
    Apr 2008
    Location
    Oklahoma City
    Posts
    18

    StageII cam package?

    Looking at the 100 horsepower article on the front page, just wondering whats included in this package. Just looking at Sigs i see most trucks are using this same cam or close too it. Im seeing lots of Yank 3000s, are those easy to find? already have the LT pacesetters with the Y, magnaflow, and air raid intake waiting in the garage......just need a cam and tune to put my neighbors f150 were it belongs. He is also deployed and keeps talking his truck up, makes me wanna blow his doors off!

  2. #2
    Join Date
    Apr 2008
    Location
    Lebanon TN
    Posts
    116
    I am not sure about what is listed in the article, but if you want a nice Stage two package Heads ans Cam go to www.texas-speed.com You will want the 220/220 112 LSA cam offered in the package.
    Chris S The GoFastPadre 00 Sierra ECSB Z71 Mods so far Headers Dual HFC's Flowmasters K&N CAI and much more to come. 06 Grand Prix no mods yet

  3. #3
    ff_jeff Guest
    unless he has the lightning or a well built engine ie., nitrous or Supercharged than I bet you could walk him now. Ford trucks are slow... Lamborado has headers a cam with other bolt ons and makes about the same power as the lightning. Normal f150's are gutless. If you have a reg cab and you get a cam, you will walk him if he has a lightning.

  4. #4
    Join Date
    Apr 2008
    Location
    Oklahoma City
    Posts
    18
    well the article has a stage II comp cam package from nelsons.....was wondering what it included for the 690$. pushrods, 981s, cam......maybe gm gaskets (main seal, timing, water pump), LS6 chain, LS6 oil pump. anyone make a full up swap kit like that?

    don't wanna walk him, i want humiliation!
    Last edited by HuskerBlood; 05-05-2008 at 10:54 PM.
    '01 RCSB 5.3L BLK Silverado, Radix 112, ABEL Racing Tune, LT Pacesetters ORY, 3"Magnaflow

  5. #5
    Join Date
    Feb 2007
    Location
    Fort Worth
    Posts
    9,578
    The cam, pushrods, and 918 Comp valve springs are included in the price. No need for seals or gaskets or timing chains--unless you ABSOLUTELY need them. You will need a new crank bolt. That is really only the one thing that needs to be replaced.

    2000 ECSB 6.0L
    TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts