Traction aids w/ posi ?

[storm5.3]

What kind of traction aids do you run (bars,rails etc.) to stop axle hop? Got posi installed this past weekend and broke the tires loose and I skipped my way down the road. Yep, left two nice dotted lines down the road. So just wondering what some of you run if you've had this problem...Zed

[01Thunder]

most people are running the cal-trac bars on their set-ups.
I am fabbing up a custom set of ladder bars right now, I will post pics later.

[farmtruc]

caltracs are it, like thunder said.

later,

allen

[silverbullet]

Where do you get caltracs?

[fullthrottledan]

i just clamped my springs together(cheap way) till i cracked my axle tube. now im fabbing up a 4 link and coilovers.

[TnTrk53]

What kind of power are you making? If your near stock you might just need to experiment with air pressures. Road pavement type and smoothness make a big differance. I find that soft rubber compound tires are very helpfull but they'll wearout fast on the street. I run 28#'s in rear tires unless it's loaded.

[storm5.3]

Not much right now only stock w/ exhaust and headers. Just got cam in today nothing fancy just a stock crate motor cam #0965 I picked up on ebay. I did hit a patch in the road and that seem to set it off. Once it started hoppin it didn't stop till i let off about 75 to a 100yds later. This was just on a back road testing the new posi I installed. Tires are Pirelli Scorpions 245/70/16's. Hoping to put cam in this weekend if all goes well, then headed to Nelsons for a tune!!!

[01Thunder]

put some 285/60/16 on there, has more surface area in contact with the ground

[The_Mexican]

Originally posted by silverbullet@May 25 2004, 12:11 AM
Where do you get caltracs?

http://www.calvertracing.com/