Hey bro, I've been doing some research and that's a good package but it's all in how much money you want to spend as to how far yuo can go. Edelbrock, Holley, the GM Ram Jet and there are a couple of more after market fuel systems out there that will do what you want and they average $2000.00 to $3000.00 in cost. What you might want to consider like I am, is it worth the cost when you can pick up a used LS1 with tranny for $3000.00 to $4000.00 with wiring and ECM complete. This way you'll get power and fuel economy. If you decide to go with the L31, you can use the Fastburn heads and the Edelbrock system together. If you really want to go unique, get the Ram Jet fuel system, change out the the fuel injectors to some higher flowing one's and out you a decent cam in and you'll be in the 13's easy. You'll have to get the ECM and wiring harness seperate.



SB Chevy Ram Jet Fuel Injection Kit, Less Electronics
Price: $1,329.50
Part # 12498032


Ram Jet Fuel Injection Kit, Less Electronics

This retro-fit fuel injection kit is released for use on small-block V8 engine using vortec design cylinder heads. The vortec heads are P/N 12558060 iron or 12464298 aluminum. This fuel injection unit must use an after market ECM and wiring harness with the proper calibration. This unit is used on 350 Ram Jet engine P/N 12495515.

Technical Notes: This kit includes these major items plus brackets, sensors, bolts, nuts, gaskets, and other small parts. It does not include ECM or wiring harness.

PART # QTY DESCRIPTION
01115498 01 Coil-Ignition
12097982 01 Wire Assembly - Marine Ignition
12489371 01 Manifold, Intake
1104060 01 Distributor Assembly - Ignition
10456126 01 Sensor Assembly - Knock
17096144 01 Throttle Body
12553918 01 Fuel Injection Rails
17124248 08 Injectors
16249939 01 Map Sensor
17123897 01 Fuel Pressure Regular