Paging....... Flyer

[The_Mexican]

Hey man seems to be that we have a similar set up and want to ask you what other mods do you have besides the ones that are in my sig.
Asking this because of your truck's E/Ts are great ( 12.5x sec. or 12.6x sec. or something like that ) and you have the stock radix pulley, I'm using the 2.90 and I'm stuck in the 13 sec.

Any other mods you have/recommend?
Do you have single or dual exhaust?
Is the 6.0L radiator worth it?
Tips?

Thanks.

[Tiburon]

Gilberto, the reason he is .5 sec faster than you is because he has a TT3000 stall. That stall shaves off .5 or a sec on the 1/4.

[The_Mexican]

Thanks for the reply File, I'm still saving for a full built tranny and I'll get the TT3000 for sure, I hope to be in the 12's by then.
Saving money with this trucks is hard, I also want to buy some leather seats and other appearance mods .

Tib, do you know of a good performance shop in/near Edinburg? I'm planning on getting a set of ET streets but the only near shop I know is DeLeon in McAllen and I want a little more choices.

Thanks.

[Flyer]

I also have a Volant air box instead of the factory one, a little more cam, and like Tib said, the converter. The converter should make your truck sick! I wouldn't go with anymore than the TT3000 though. You will definantly need some slicks for the track when you get that thing on there.

[The_Mexican]

Thanks Flyer, your times are sick , I hope i can reach 12's someday, so TT3000 it is then. I'm getting some et streets also.

[Flyer]

I would have gone with the Hoosier slicks if I could do it again ... just thought I would throw that out. I still get a little slippage with the ET Streets.

[The_Mexican]

Worth to check them out, thanks.