****, pushed back a month But any concern of strength loss is out the window.



"The Next Big Thing". PATC has developed a new planet gear set for 700R4 / 4L60E transmissions. This will be the biggest thing in 700R4 advancements in years. These will have a 2.66 to 1 first gear, 1.55 to 1 second gear, 1 to 1 third gear and .64 to 1 overdrive ratio. This is a 36% overdrive making this one of the best overdrive ratios around. The 1st to 2nd RPM drop between gears would be slightly less than the RPM drop on a 200-4R transmission. This is what people have been asking for, for years. These will work on any 4L60E type transmission without a gear ratio error code, if the PCM is modified.

The sun gear is made from 4340 billet steel and the pinion gears are 4130 steel. The pinion gears are .180" larger and have 18 teeth instead of 14 teeth found on 700R4 type transmissions.

This gear set is used to reduce torque multiplication / rotating speed in the transmission in first gear. This improves track applications that overpower the rear tires upon launch. This is common with numerically high final drive ratios. (IE 3.06). Now you will have a choice between the wide ratio or the new close ratio gear sets. It has been reported that the 2.66 gear set could lower your quarter mile time as much as 4/10 of a second over the 3.06 gear set. Plus better mileage and lower RPM with the .64 to 1 overdrive. The first 48 are in production now and the approximate release date is 3-1-2008.