+ Reply to Thread
Results 1 to 10 of 10

Thread: injector cleaning?

Hybrid View

  1. #1
    Join Date
    Feb 2007
    Location
    Fort Worth
    Posts
    9,578
    Guys--Seafoam works great if you do it the correct way. Some people have not performed the Seafoam technique correctly, hence creating problems. Seafoam does not clean the injectors unless you put the bottle in your gas tank. You can somewhat clean out your intake by pouring small amounts into an intake vacuum line... The best way to clean out your injectors is to take the injectors out and soak them in a warm cleaning solution (preferably fuel injector cleaner). Or you can have them sent off and have them cleaned. Either way, you should have the injectors taken out and thoroughly cleaned every 60K or so...

    2000 ECSB 6.0L
    TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's

  2. #2
    Join Date
    Jun 2007
    Location
    saratoga springs ,new york {upstate ,adirondacks }
    Posts
    1,878
    hey tx im having an situation with them beeing clogged,i replaced 2 of them ,it worked,then about 1 week later im starting too act up a gain .im losing accelllaration.and doing a little popping here and there.not much but i know its the same thing as b4 i changed the 2 bad inj.im losing power and my a/f is all over.what do ya think about cleaning em too get em working again?
    mods:2004 sierra ext sb,20s ,big brake kit w,hawk pads,air bagged,2006 6.0 lq4 swap,vortec supercharged10psi, air to water intercooled w/ dual electric fans on it ,snow meth injection kit,60lbers, e-fans ,big radiator swap ,cam 218 /222 548/550 comp .hardened prs .1.85 comp roller rockers ,guideplates ,crane double springs,trans 4l65e built .pacesetter l/ts true duals w/x pipe and magnaflows,14 bolt rearend swap ,3.73s,aroemotive fuel pump system w/elec.fuel controller and bypass regulator a/n fittings, taylor 10.5s interceptor gauge,aem w/b a/f ,autometer boost/vac NELSON 93 OCTANE TUNED .

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts