Originally posted by SportSide 5.3@Mar 30 2004, 02:43 PM
mexican,

how is that cam? give some details about it?
appreciate it
No problem, it's a thunder racing comp cam, 212/218 .558/.563 with a 114 LSA (high lift version on lower lsa) also did 918 springs, pushrods and ti retainers
check http://www.compcams.com/Technical/Catalogs...ML/200-203.html P/N 54-424-11 for the cam.
The cam pulls very strong from 2500 rpm and up, made a lot of difference, the only problem was to make it idle right, NOT for the tunning but because 03 and up trucks have the electronic TB so the computer take a little longer to learn to idle right, but once it does it, it idles great, you can't even notice the cam is there until you punch it.
Hope this helps.

RChevy.48, what are the specs on your cam?, there are a couple of friends that want to do the swap and don't want to go with the comp cams?
keep us updated on how it runs.