Injector Adapter Question?

[RWChevyZ71]

I have some mustang cobra injectors, and I am going to put them on my 2000Z71. Is there any fuel injector adapters out there to fit this application so I don't have to use the cobra connectors?

[bluecajun5.3]

here you go...

http://store.summitracing.com/partdetail.asp?autofilter=1&part=MSD%2D2400&N=700+ 0&autoview=sku

[RWChevyZ71]

how exactly does those connectors work?

[casey23]

since they dont come with directions ...and I wasted 14.00 on that setup myself.. I will tell ya.. You remove your Pigtails.. and cut the ends off... feed the wires threw the new msd plug and attact the new terminal ends.. pull back to seat them in the new plugs.. make sure you use the weather packing... Repeat steps 15 more times or unit you get sick of jacking with it and buy 30.00 worth of Pre wire connectors you should have bought the first time !!

[RWChevyZ71]

I was looking for something that i do not have to cut any wires because if I wanted to cut wires I would just use the cobra connectors... I was wondering if there were any adaptors out there

[casey23]

I dont think so.... We would all use them... just none made that i know of... It isnt a huge deal since if you were to go back to stock you could use ls1 injector from a camaro... its the same pigtail

[Trick1]

Fast is making injector plugs to go from the new harness's to the older injector bodies. Is this what you are looking for.

[RWChevyZ71]

yeah i had seen those but i dont know if they will work or not

[Trick1]

I have a set here and will take a look tommorrow. My 2000 we are putting 48's in and this is the one Fast told me to go with.
pn170603-1

[SRT10KLLR]

Those look like adapters to go between EV6(USCAR) - EV1.

I thought we had the weird Multec something.