What will the achive if anything im just curious and looking for more cheap hp
nevermind i found out what i needed to know
What will the achive if anything im just curious and looking for more cheap hp
nevermind i found out what i needed to know
Last edited by GenIII_4Ever; 12-08-2007 at 11:35 PM.
so is there any power to be had by putting on 6.0 heads???
no not unless u mill the 6.0 heads or get a thinner gasket becuase when u swap them it drops ur compression
I do not think they will work. I think the valve will hit the bore? I could be wrong.
Jamest
12 Sec. Club! SOLD
La Viuda negra/ a.k.a. Black Betty
LQ4 6.0L, WCCH HEADS, LEVEL 5 FLT 4L80E TRANS. WITH TRANS BREAK, YANK 3200 STALL, TRICK TURBO, TURBONETICS T-76 TURBO, CUSTOM INTERCOOLED, 68lb INJECTORS, CUSTOM S/D TUNE FROM NELSON PERFORMANCE, COMP CAM 212/214 .557/.559 116+2, SNOW METH. KIT, . ALL INSTALLED AND DYNOED AT NELSON PERFORMANCE: 5**?HP @ 5073rpms and 5**TQ @ 4389rpms AT THE WHEELS WITH 10 PSI OF BOOST. ALL 3/4 TON TRUCK 5435LBS, NOTHING TAKEN OFF, STREET TIRES, AND USUALLY 2 BABY SEATS. WANNA RIDE?
SOLD***
no i dont think the valves will hit, but it will def drop the CR, might not be a bad deal for a turbo build.
Originally Posted by HotRodV6
I'm working on a set of small valve 317s. I have to pick them up and get them to my head guy to port the runner, install a new valve seat, and flow them at a 1.89" intake I'm thinking around 260-280cfm @ .550
Plus the 10cc gain in chamber volume I estimate to drop it to around 8.4:1
The superior man is modest in his speech, but exceeds in his actions. - Confucius
"He who asks of life nothing but the improvement of his own nature, is less liable than anyone else to miss and waste life."- Henri Frederic Amiel
'01 Chev Z71 LT - '85 BMW 745i TURBO - '88 BMW 750iL - '88 Ford F150 XLT Lariat - '79 MB 240D - '79 MB 280S Euro
'80 MB 380SE-5.0 Euro - '85 MB 300SD - '87 MB 300SDL - 1990 MB 300SEL - '91 MB 300SE - '91 MB 560SEL
Let's face it, the red hair... makes 'em wet.
Posting Permissions
Reply With Quote
