The real deal from FLT

[567234ta]

what a cool dyno

[Vince_B]

This is a good question that was asked by a member on LS1 tech. Thought I could add it to the thread to give you guy's a better understanding of the video above. Vince

Whats the constant for the test? Do you keep the same input level to the trans (load) and vary the pressure, looking for a weak spot? What is the load on the 125 psi pull? That is a vey nice piece of equipment. Makes my mouth water!
Mec

There is a load devise that is attached to the output shaft. With this we can simulate different driving conditions. It basically has a huge rotor with a magnetic devise that increases or decreases the load depending on where we have it set. For the input depending on how many rpms you decide to shift it at would be the input load. The audio in the video does not really do justice for what I can hear with this machine. It is much quieter than other machines that I have operated. When the trans shift you can hear the parts in the unit doing there thing. This allows us to keep the quality control very high. Also In past years I have operated gas dynos. They are very noisy and you really can not here the internals of the transmission like the electric Dyno that FLT owns. Some days I love this machine and others I would like to take sledge hammer to it when chasing a noise. But the idea for it is to test and sometimes we do go after an issue until it meets our standards. We are also looking at the pressures with this machine. Making sure at different duty cycles (pressure swings) the pressure is correct for the application and also that the pressure maintains it's psi during the shifts correctly. With that being said we are also looking at cooler flow and cooler pressure. These pressures are very important for the life of the transmission. With the use of the input and output gauges we can monitor if the transmission has slippage. Depending on the stall of the converter we will see different numbers. Along with that we can check for the lockup function of the TCC. This is usually tested in 3rd gear when the transmissions internals in theory are turning 1 to 1. With the lock up applied the output reading should be the same as the input and in most cases the output is a couple rpms higher. Hope that this has answered your question or has given you a better understanding of what we do. Vince

[Vince_B]

Just a heads up the sale ended today. Vince

[Vince_B]

Figured I would bump this up for those of you that might have missed it. When looking for a quality transmission these are some of the things you need to look for. Ask any company that you are considering what is going into their units. Compare the products. Price and other free items such as shipping and cores are just being offered because the product is suffering in my opinion. Meaning they are not giving you more for your money with the transmission. Just other things to make it appear that they are. Keep a clear mind and make sure what you are purchasing is all it can be. Not just marketed to look better. I see others products every day when tearing down cores. Most do not put half of the money that we do into their units and charge the same price. Think about it, what are you really getting? Also look to see how often they are running a sale. It looks desperate in my eyes and obviously the sale is there to produce some work because sales are down. Where does that leave the product? We do not give our stuff away and that should tell you something. Thank you for taking the time to read this. Shop wisely! Vince