Well, Caltracs came today. These things my only have $40 worth of steel and $120 worth of heim ends but they are a work of art.
Well, Caltracs came today. These things my only have $40 worth of steel and $120 worth of heim ends but they are a work of art.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
I told you !!... I know they are simple and not alot to them... BUT the quality is GREAT !!!!!! .... and a very decent deal at 330.00 !!!!!!
yep...
'13 silverado LT...stock
'11 lt 4x4 z71..tvs1900
'01 gmc twins 6.0 jakes 400 ladder bars w/ coilovers tuned by nelson performance
I'll start the install on them Monday, have family stuff going on this weekend. I've pretty much had the weekends to myself for a while so I really need the family time. I also have to notch out my Beltech front hangers to clear the pivot plates.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
If you wanted to give some a try.. we could have done some swaping... U could have road tested that 408 before you stuffed it back in your truck....
yeah just take a look at my pics i posted awhile back for the hangers.Originally Posted by RedHeartbeat
good luck with the install red!
11' Sierra 6.2 NHT
14.46@91 Stock
89' Mustang LSX
10.35@130 pump gas LQ4
Knothead Racing
Do you have any pics?
New project truck:
'00 ECSB 4wd, 5.3, 3" body lift, gap guards, 18x9 Moto Metal 951's, 305/60/18 Mickey Thompson MTZ's
To-do list: Built rear end, 6.0 swap with built top end, 4L80e, and a couple bottles in the bed.
Alright , traction off the line .Well, Caltracs came today. These things my only have $40 worth of steel and $120 worth of heim ends but they are a work of art.
Now what is a tune again?
Comp Cam 54-412-11 , Int:265, 212, .522 , Exh: 271, 218, .529 , LSA 114 , Longtube , CAI (Vararam) , TransGo HD2 shift kit , tuned by me with EFILive
pics yet
02 Chevy EcSb Z71, 5.3, Helix Tb Spacer, AEM Brute Froce Intake, Msd 8.5 wires, NGKTR55 IX, B&M 25k Trans Cooler, Hypertech 160, Nelson Tune, Nelson Harness & Ls1 fans, Fully Built tranny, tb2600, 216/224 551/551 115LSA, yeller z06 springs, magnaflow, cut-out, hi-flow cats, etc...
What's the word? I know when I installed my Cal-Tracs the hardest part was pressing the leaf spring bushings out. I love them for the price and they're so easy to adjust!
97 GMC, 2002 LS6.
1991 GMC Syclone #1428
Posting Permissions
Reply With Quote
