+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: ALUMINUM 29" and 34" electric fan shroud.

  1. 09-08-2007 06:36 PM #1
    Trick1
    Trick1 is offline Senior Member
    Join Date
    Oct 2006
    Location
    Wichita Falls Tx.
    Posts
    1,101

    ALUMINUM 29" and 34" electric fan shroud.

    Ok we got the fan shroud finished up. It got delayed for several reason.
    The 29" core is alot different then the larger 34". The hose necks are extremely close to the core leaving little to no room. So the first sample had to get tweek a couple of times.
    Now we are really happy with the fit and these twin 14" pullers have no problems keeping this truck cool, just sitting with the a/c running for over 10 minutes after the test drive. You can feel the air getting pulled in at the grill.
    Installs into the factory location, using the stock hardware.
    Install time for the fan was under 30 minutes. Took a little while to find my 10mm socket. LOL
    We used dual 30amp Bosch relays, wire loomed everything, and installed dual circuit breakers for protection. (They are the yellow covers in the pics.)
    Right now the fans are just ON when the key is on.

    If you do not have the proper spanner fan removal tool here are some tips.

    TIPS and tools needed for stock fan removal:
    15mm socket
    1/2 inch breaker bar
    large cresent wrench
    and about a 18"-24" 2x4.

    step 1: Simple install the cresent wrench on the large hex nut aiming the tool straight up.
    step 2: With the 15mm and breaker bar installed on belt tensioner.
    step 3: Apply some force to tighten the belt.
    step 4: Take the 2x4 and knock the hell out of the cresent wrench, counter clockwise or towards the passenger side of the vehcile.
    NOW repeat until the large nut comes loose, then remove tools and fan. It took me 6 hits to make it happen. Recommend you hit the short side of the wood, less vibration will hit your hand. LOL..

    Fans with NO relays or wiring will be 350.00 + shipping...
    PM if your interested.

    I will be heading to the dyno next week. Then the turbo will be going on.....

    Rick



    Last edited by Trick1; 09-08-2007 at 06:46 PM.

    Simply the best turbo kit for late model GM trucks.

    Custom fabrication to fit your budget and needs.
    Dealers for Precision, Comp. & Magnum turbos.

    Online Store
    [/CENTER]
    Reply With Quote Reply With Quote
  2. 09-08-2007 08:19 PM #2
    Jamest's Avatar
    Jamest
    Jamest is offline Senior Member
    Join Date
    Jan 2006
    Posts
    2,590
    I am going to get one just not right now. I have the 34" rad. I have to put on the trick turbo first.

    Jamest
    12 Sec. Club! SOLD
    La Viuda negra/ a.k.a. Black Betty

    LQ4 6.0L, WCCH HEADS, LEVEL 5 FLT 4L80E TRANS. WITH TRANS BREAK, YANK 3200 STALL, TRICK TURBO, TURBONETICS T-76 TURBO, CUSTOM INTERCOOLED, 68lb INJECTORS, CUSTOM S/D TUNE FROM NELSON PERFORMANCE, COMP CAM 212/214 .557/.559 116+2, SNOW METH. KIT, . ALL INSTALLED AND DYNOED AT NELSON PERFORMANCE: 5**?HP @ 5073rpms and 5**TQ @ 4389rpms AT THE WHEELS WITH 10 PSI OF BOOST. ALL 3/4 TON TRUCK 5435LBS, NOTHING TAKEN OFF, STREET TIRES, AND USUALLY 2 BABY SEATS. WANNA RIDE?
    SOLD***
    Reply With Quote Reply With Quote
  3. 09-08-2007 11:09 PM #3
    Trick1
    Trick1 is offline Senior Member
    Join Date
    Oct 2006
    Location
    Wichita Falls Tx.
    Posts
    1,101
    Great, I have a 34" set up ready to go. You will love the turbo set up, and when the truck is down with the install, perfect time to throw the fans on.

    Simply the best turbo kit for late model GM trucks.

    Custom fabrication to fit your budget and needs.
    Dealers for Precision, Comp. & Magnum turbos.

    Online Store
    [/CENTER]
    Reply With Quote Reply With Quote
  4. 09-11-2007 01:07 PM #4
    03chevytruck
    03chevytruck is offline Monroe Muscle
    Join Date
    Sep 2007
    Location
    Monroe,Louisiana
    Posts
    194
    PM sent
    2003 RCSS Chevy 5.3L Fully Bolted, Cammed, Yanked, and 342s. Borla Exhaust w/ Electric Cutouts.
    Reply With Quote Reply With Quote
  5. 09-11-2007 04:06 PM #5
    Trick1
    Trick1 is offline Senior Member
    Join Date
    Oct 2006
    Location
    Wichita Falls Tx.
    Posts
    1,101
    The fans added 22HP 20 ft tq.
    to the truck, not bad over the stock unit.

    Rick

    Simply the best turbo kit for late model GM trucks.

    Custom fabrication to fit your budget and needs.
    Dealers for Precision, Comp. & Magnum turbos.

    Online Store
    [/CENTER]
    Reply With Quote Reply With Quote
  6. 09-11-2007 04:23 PM #6
    Jamest's Avatar
    Jamest
    Jamest is offline Senior Member
    Join Date
    Jan 2006
    Posts
    2,590
    That is sweet!

    Jamest

    Quote Originally Posted by Turbo6.0L View Post
    The fans added 22HP 20 ft tq.
    to the truck, not bad over the stock unit.

    Rick
    12 Sec. Club! SOLD
    La Viuda negra/ a.k.a. Black Betty

    LQ4 6.0L, WCCH HEADS, LEVEL 5 FLT 4L80E TRANS. WITH TRANS BREAK, YANK 3200 STALL, TRICK TURBO, TURBONETICS T-76 TURBO, CUSTOM INTERCOOLED, 68lb INJECTORS, CUSTOM S/D TUNE FROM NELSON PERFORMANCE, COMP CAM 212/214 .557/.559 116+2, SNOW METH. KIT, . ALL INSTALLED AND DYNOED AT NELSON PERFORMANCE: 5**?HP @ 5073rpms and 5**TQ @ 4389rpms AT THE WHEELS WITH 10 PSI OF BOOST. ALL 3/4 TON TRUCK 5435LBS, NOTHING TAKEN OFF, STREET TIRES, AND USUALLY 2 BABY SEATS. WANNA RIDE?
    SOLD***
    Reply With Quote Reply With Quote
  7. 09-18-2007 09:40 AM #7
    567234ta's Avatar
    567234ta
    567234ta is offline Senior Member
    Join Date
    Feb 2007
    Location
    Sallisaw OK
    Posts
    2,194
    do you have any for OBS? 96'
    Reply With Quote Reply With Quote
  8. 09-18-2007 10:23 AM #8
    Trick1
    Trick1 is offline Senior Member
    Join Date
    Oct 2006
    Location
    Wichita Falls Tx.
    Posts
    1,101
    Quote Originally Posted by 567234ta View Post
    do you have any for OBS? 96'
    At this time I do not. Where you located at?

    Simply the best turbo kit for late model GM trucks.

    Custom fabrication to fit your budget and needs.
    Dealers for Precision, Comp. & Magnum turbos.

    Online Store
    [/CENTER]
    Reply With Quote Reply With Quote
  9. 09-18-2007 11:50 PM #9
    567234ta's Avatar
    567234ta
    567234ta is offline Senior Member
    Join Date
    Feb 2007
    Location
    Sallisaw OK
    Posts
    2,194
    Quote Originally Posted by Turbo6.0L View Post
    At this time I do not. Where you located at?
    im in sallisaw OK
    Reply With Quote Reply With Quote
  10. 09-24-2007 08:01 PM #10
    Trick1
    Trick1 is offline Senior Member
    Join Date
    Oct 2006
    Location
    Wichita Falls Tx.
    Posts
    1,101
    Quote Originally Posted by 567234ta View Post
    im in sallisaw OK
    Give a shout where is Lakeside city, right beside wichita falls,
    we could build one for you just need the Shroud to go off of. And test fit the prototype part before building the real one...

    Rick

    Simply the best turbo kit for late model GM trucks.

    Custom fabrication to fit your budget and needs.
    Dealers for Precision, Comp. & Magnum turbos.

    Online Store
    [/CENTER]
    Reply With Quote Reply With Quote
+ Reply to Thread
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules