Quote Originally Posted by Speedo View Post
I'm putting a 5.3l in an '85 4x4 frame and I've got a radiator out of a 2000 Silverado. The fittings in the radiator for the tranny cooler lines are a push in style and I'd like to adapt them to use flare fittings. Does anyone know if there are adapters to do this that are readily available?

Thanks,
Gus
Gus I looked around on the internet and didn't find anything..you may want to cal hayden @ 800-433-7508
couldn't you get two short pieces of line from a junk yard that fits into the 2000 radiator and flare the other end ...then you could use an adapter between the old and new. or maybe they make a slip on compression style coupler that would slide over both lines... but that would probably only work if the OD is the same between the two line