Quote Originally Posted by 80 Square View Post
Good evening Homer. New to this thread and working through lots of info. It looks like you completed exactly what my son and I are attempting. A 1994 GMC 1500 4x4 - had 4.3 V6 originally. Putting in a 2006 6.0L and bolting up to original NV3500 5spd.

Wondering how your project turned out?

I had test fit the engine to the tranny using a 4.8L flywheel (LUK LFW387) and the throw out bearing did not contact the clutch. I am hoping the fly wheel is the issue.
Hi, it turned out great! Im very pleased with it, i used a sachs flywheel and a stock to my original setup clutch plus a pilot bearing from napa that i found a part # for by searching through this forum, if you have more questions we can connect through fb maybe