Thanks for all the replies. To answer all the questions and ask a few more....

It has been 15K since I last rotated and it was 12K before then, so not as often as I thought.

The last set of tires I replaced showed a similar wear pattern around the outer edges.

As far as the hubs, what is a quick and dirty way to check if they are loose?

Will running 285s on a 8" wide rim be too tight of a fit or bulge too much where the edges may not grab as well?

Frame was hit on the front passenger side and slightly pushed the frame more towards the driver side.

Here are the actual specs for the frame and alignment. Let me know if you see something I am missing. The written comments are from me. Thx!

Frame -->
Alignment -->