1991 4x4 k1500 6.0 swap header question.

[89sierra]

ok so i totally forgot to take the camera with me tonight to take pictures but i will when i go back tomorrow. on the drivers side right where the header curves where all the tubes join it just slightly rubs the frame. and on the passenger side the header just touches the top ear of the tranmission housing. but this side is because i am running a 700r4 which the housing that bolts the transmission to the motor is a little different between the new 4l60e and the 700. but the good news is there is plenty of clearance for the drive shaft and every where else