Well i installed some pacesetters today! Along with the ory we made it 3.5 inch instead of using the factory exhaust piece. From there we ran 3.5" exhaust into a 5x11x22 si/so 3.5 muffler the we ran it over the axle and dumped it! I am 100% happy with all the tones at every rpm! At cruising it sounds like it's a stock muffler set up! At WOT it screams its lil geart out!
I took the pics with my phone for now we were ready to leave. I will get real pictures this week to show all of the work!
3.5" mandrel 90° over the axle section
Cut a mandrel 3.5" 90° to piece together to get around the axle
Center section picture
Chris at LSx did all the welding and fab work on the after muffler section.
Reply With Quote