Truck is back up and running!

[f4tal]

Geoff told me to use 7.425 pushrods with stock height heads. So with my heads milled .030 I figured I'd be fine using a set of 7.4s I already had. Might have to second guess that.

Thats what i was told by Geoff at EPS. He said to run 7.4's on my milled .030 heads. I didn't feel like buying PR's twice so i put them in. They worked fine with the stock heads. They are extra loud now with the milled heads, i guess the valves are finally opening all the way. Haha

if theres play in the rockers wouldnt you need a longer PR?? or am i reading this wrong?

Thats my guess but supposedly you want a small amount of clearence for the oil to make it up and out of the PR thus providing lubrication. Plus With about .50 thousandths of play the PR moves so quickly that it causes the cam to become a solid roller at high RPM's. This is all hear say. Don't quote me