I drove 3 hours to Baton Rouge today to have my truck tuned @ EPS. He is one of the writers of efilive and the roadrunner addition to it! He knows his stuff and also created the EPS cam lobes that many people use today! There aren't many shops nearby who are willing and ready to tackle this chore but he was happy to help me!

The day started off horrible due to bad weather and my alarm clock not going off so I kinda expected the worst! I drove 3 hours to Geoff's place and he started by altering the tune that was currently in the truck! He made five different changes in the tune just for idle and part throttle before we took off! I was amazed at the difference! We came back and put the truck on the dyno and it broke my heart! The tune wasn't set up for 10 psi so it was safe! Geoff looked it over and made an initial pass of 372 hp and we were stunned! He looked over the log and I had ZERO timing! He made a total of 15 dyno runs today and the truck ended up making 513/567 on pump gas and 16 deg of timing! On to the pics!!!!!
Mods:
6.0 zo6 cam and yellow springs
Non-sponsor Turbo kit with a MP70mm
Tial wg and BOV 10psi spring
4l80 trans with hd2
GM 3.73 10b with g80 still(timebomb)






:jerkit: