How about these cam specs

[fubutx]

if I go with the VHP cam., pac 1218s...what pushrods would be recommended? (i need stock length with that cam)...VHP sells them for 130 for the set. Figured i'd shop around before buying those


He also recommended the dual spring setup over a single spring incase one breaks, there is some backup instead of destroying the motor. I don't think that'll really be an issue with the way this motor is used.

that vinci dude all ways wants to see you those springs he offers, just go with the the pac 1218. they are good for .600 lift anyways.

for push rods im running this right here, they are 6.25 each. so you spend 100 on all 16

Manley Performance Parts 25735 - 7.400 Stock Length LS1 Manley Pushrods | SDParts - 1-800-456-0211

the cam i got from him was:
DUR @ .004" 276*/ 284*
DUR @ .050" 208*/ 216*
LIFT .530 / .530
OVERLAP 42*
LSA 113*