Results 1 to 9 of 9

Thread: Performance parts 4 sale

Threaded View

  1. #1
    MidnightRider Guest

    Performance parts 4 sale

    The following items are forsale from my twin kit they have little to 0 miles on them. Nothing im selling has anything wrong with them. Everything is OBO. Please no silly or stupid remarks on my thread. Thanks everyone for looking.

    1-Hpm(danny tranny) 4l65e 2WD /w Yank SC3000. condition=excelent (2000$)+ shipping If i have to separate It will be 1750 for tranny and 650 for the Yank

    This unit has 7k on it. The tranny works and shifts flawless. If you need to talk to the builder i can get you his number. I dont want to separate the Yank SC3000 from the sale. The Converter still has the free restall from yank if you want it different. this is the billet cover 1000$ converter. Shipping is about 150 on the tranny and 45 on the verter.


    Specs on the trans are as follows

    Superior shift kit
    corvette servo
    File fit servo pin
    1-2 accumulator piston aluminum
    forward accumulator aluminum
    rpm spring kit
    alto red eagle 3/4 clutch pack with 9 clutches and kollen steals
    alto clutches for all other frictions
    carbonite wide band with reinforced anchor
    entire valvebody blueprinted
    rear slinger planetary ( 4 pinion hardened with reinforced ring)
    29 element dual cage input sprag
    350 lock up front stator bushing
    bronze case bushing replaced with babet bushing
    bleed orifice drilled in input housing
    blocked third gear accumulator exhaust
    Beast sunshell
    New lock up solenoid
    New shift solenoids
    New internal wiring harness
    Trans go separator plate




    2-Edelbrock Coil covers w/ LS1 coils. condition=excelent (230$) shipped

    These are already modified for the trucks to fit around the altenator and fire wall. They have the required LS1 coils. they looked great with the intake but im going another route for the LSX


    3-LS7 lifters. condition= new (110$) shipped (SOLD)
    never run got them from 408luke i cant use them in the LSX block




    4-Delphi mini 62lb 650cc/min injectors condition= excelent with low miles (375$) shipped
    These are the short truck style injectors all flow matched
    8 - Multec II - 62lb, 650cc/min Fuel Injectors - NEW:eBay Motors (item 370269752989 end time Dec-02-09 15:36:12 PST)

    Fuel Injectors MOD Sets - Siemens Injectors & Lucas Injectors - Racing Fuel Injector Sets



    5-stock 4.8 5.3 6.0 injectors condition 55K miles (75$) shipped they worked fine wheni upgraded to the radix a while back they have been in proper storage since
    Last edited by MidnightRider; 11-30-2009 at 08:17 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts