Garrisson got close.

8mm, 10mm, 13mm, 15mm sockets (short and deep)
Spark plug socket
LS1 style valve spring compressor
Pliers
24mm socket for crank bolt
Heavy duty 3-jaw pulley puller
Kerosene torch (for heating up crank pulley to get back on nose of crank)
Small pick (for tranny cooler lines)
Slot head screwdriver
Torque wrench
5 lb bag of Kitty Litter
6 quarts oil and filter
1 gallon of Dexcool coolant
Timing chain (depending on mileage)
Crank Bolt
Water Pump gaskets (depending on mileage and condition)

I think that's it.

If you don't have a compressor, you can use the TDC method for the springs...