-
Guys--Seafoam works great if you do it the correct way. Some people have not performed the Seafoam technique correctly, hence creating problems. Seafoam does not clean the injectors unless you put the bottle in your gas tank. You can somewhat clean out your intake by pouring small amounts into an intake vacuum line... The best way to clean out your injectors is to take the injectors out and soak them in a warm cleaning solution (preferably fuel injector cleaner). Or you can have them sent off and have them cleaned. Either way, you should have the injectors taken out and thoroughly cleaned every 60K or so...
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules