+ Reply to Thread
Results 1 to 8 of 8

Thread: Back Stop Light(s) Stop Working

  1. #1
    Join Date
    Nov 2006
    Location
    Cajun Country
    Posts
    440
    I checked and the int. and under hood fuse and bulb all good, all the other lights work
    fine. both tailgate brake lights don't work but the 3rd lights ok, any idea what it can be.

    can't get into the dealer till thurday

    05 Silverado

    thanks
    DD: 2008 TB LS
    2005 Silverado VHO




  2. #2
    Join Date
    Mar 2003
    Location
    San Marcos Texas
    Posts
    4,393
    Maybe a turn signal switch problem? Or hazard switch? I can't remember if the new trucks work like the old ones did. Do the parking lamps work? It could be a ground problem in the rear. Do you have some kind of trailer wiring hooked up? Maybe some connector plug is loose.
    2006 Superior Blue Trailblazer SS AWD, Stock as a rock

    Sold: 2002 GMC Sportside Denali front end with a 2002 LS1, FLT level 5, Yank 2600, Trick Turbo, T76, Nelson intercooler, 60LB injectors, Warbro fuel pump, Eaton locker, Magnaflow, 3.42, Nelson Performance Tuning (speed density).

    Sold: 1981 GMC LB RC 1500 2002 4.8L 4L60E 12 bolt 3.73 Richmond Lock Right AC PS Nelson Performance tuning

  3. #3
    Join Date
    Nov 2006
    Location
    Cajun Country
    Posts
    440
    <div class='quotetop'>QUOTE(GMCwantsLS1 &#064; Jun 2 2007, 03&#58;17 PM) [snapback]95500[/snapback]</div>
    Maybe a turn signal switch problem? Or hazard switch? I can&#39;t remember if the new trucks work like the old ones did. Do the parking lamps work?
    [/b]
    every light front and back in and out works

    It could be a ground problem in the rear.
    [/b]
    I think if its a ground other lights will be down

    Do you have some kind of trailer wiring hooked up? Maybe some connector plug is loose.
    [/b]
    I have the stock trailer socket never used it.

    the only thing I had done was have the truck detailed then I notice the next few days the brake lights are out

    on the sss board someone thinks its a recall problem, but I can&#39;t find anything on it

    thanks for the reply

  4. #4
    Join Date
    Jan 2006
    Posts
    2,590
    <div class='quotetop'>QUOTE(shakesvho &#064; Jun 2 2007, 08&#58;24 PM) [snapback]95517[/snapback]</div>
    every light front and back in and out works
    I think if its a ground other lights will be down
    I have the stock trailer socket never used it.

    the only thing I had done was have the truck detailed then I notice the next few days the brake lights are out

    on the sss board someone thinks its a recall problem, but I can&#39;t find anything on it

    thanks for the reply
    [/b]
    I DO NOT KNOW, BUT IF A BULB IS OUT WILL IT KILL THE LOOP OF CURRENT FOR THE TAIL LIGHTS? I KNOW ON OLDER VEHICLES WHEN A BULB WENT OUT THE LIGHTS DIDN&#39;T WORK B/C THERE WAS A BREAK IN THE LOOP OR CURRENT IN THE SYSTEM. I COULD BE WRONG.

    JAMEST
    12 Sec. Club! SOLD
    La Viuda negra/ a.k.a. Black Betty

    LQ4 6.0L, WCCH HEADS, LEVEL 5 FLT 4L80E TRANS. WITH TRANS BREAK, YANK 3200 STALL, TRICK TURBO, TURBONETICS T-76 TURBO, CUSTOM INTERCOOLED, 68lb INJECTORS, CUSTOM S/D TUNE FROM NELSON PERFORMANCE, COMP CAM 212/214 .557/.559 116+2, SNOW METH. KIT, . ALL INSTALLED AND DYNOED AT NELSON PERFORMANCE: 5**?HP @ 5073rpms and 5**TQ @ 4389rpms AT THE WHEELS WITH 10 PSI OF BOOST. ALL 3/4 TON TRUCK 5435LBS, NOTHING TAKEN OFF, STREET TIRES, AND USUALLY 2 BABY SEATS. WANNA RIDE?
    SOLD***

  5. #5
    DBYRD Guest
    highly unlikely. but i will tell u that if the third break lights stops working u have to replace the entire light to fix it. if u prob persists outside of the third brake light itself then u should be good. do u think it could be a fuse? also break lights on 03+ trucks are known to be problematic. daniel(red03silss) blew 3 or 4 bulbs in 2 days right after he bought his truck so it could be that its a persisting problem as u mention it may have a recall.

  6. #6
    Join Date
    Jan 2007
    Posts
    20
    i ran a set of aftermarket houseing i got off ebay and then the lights where aftermarket also reverse was like a blue color and the the other ones where stock color but they are crome bulbs anyways my bulbs melted and stuck to my brand new houseings which all happend in a period of less than 24 hours i even wiped the bulbs off

  7. #7
    Join Date
    Nov 2006
    Location
    Cajun Country
    Posts
    440
    <div class='quotetop'>QUOTE(Allstar55566 &#064; Jun 2 2007, 10&#58;09 PM) [snapback]95522[/snapback]</div>
    highly unlikely. but i will tell u that if the third break lights stops working u have to replace the entire light to fix
    it. if u prob persists outside of the third brake light itself then u should be good.
    [/b]
    My 3rd brake light is a aftermarket LED I had in for over a year and is working fine, do you think this could be the problem
    you can see it here


    do u think it could be a fuse? also break lights on 03+ trucks are known to be problematic. daniel(red03silss) blew 3 or 4 bulbs in 2 days right after he bought his truck so it could be that its a persisting problem as u mention it may have a recall.
    [/b]
    fuse int and under the hood for stop lights are fine, never had any bulbs blow out

  8. #8
    Join Date
    May 2007
    Location
    so-california
    Posts
    47
    <div class='quotetop'>QUOTE(shakesvho &#064; Jun 2 2007, 11&#58;00 AM) [snapback]95496[/snapback]</div>
    I checked and the int. and under hood fuse and bulb all good, all the other lights work
    fine. both tailgate brake lights don&#39;t work but the 3rd lights ok, any idea what it can be.

    can&#39;t get into the dealer till thurday

    05 Silverado

    thanks
    [/b]
    hey bro, I had the exact same problem the backup light works but the tail lights dont work at all, i changed my flasher i changed the fuses i did almost everything you could do to trouble shoot the problem and all it was is the damn wire that was disconnected check the tail light wires they could be disconnected . for some reason dont ask how but that wire comes loose so just check it.
    LR4 4.8 vortec , cat-cutouts, TRUE DUALS,airaid intake, MAF summit, 80mm throttle body, edlebrock headers, PCM,lowerd C-notch,flex-a-lite e-fan,180 stat. best 1/8 mile 9.9 at 79 mph

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts