Another 2/4 drop

[drag1049]

I'm confident that I want to go with a 2/4 drop, just making decisions on how I want to go. I've searched and found similar threads, but still debating between which kit. A lot of guys seem to swear by McGaughy's spindles, and a lot of people say DJM control arms. I've been looking at DJM coils/shackles/hangers. I'm sure I want the shackles/hangers for the rear, but just wondering about the front.

I just need my hand held through this since I can't seem to make my own decisions. The price is attractive for a simple coil spring drop, especially since I am a cheapass. My next choice would be to cough up for the LCAs, but I have trouble justifying LCAs since they cost twice as much.



So I'm just basically asking the guys in the know that if I buy the DJM coils/shackle/hanger kit I'm not going to regret it later.

[c1500]

<div class='quotetop'>QUOTE(Drag1049 &#064; Apr 18 2007, 06&#58;40 PM) [snapback]90441[/snapback]</div>

I&#39;m confident that I want to go with a 2/4 drop, just making decisions on how I want to go. I&#39;ve searched and found similar threads, but still debating between which kit. A lot of guys seem to swear by McGaughy&#39;s spindles, and a lot of people say DJM control arms. I&#39;ve been looking at DJM coils/shackles/hangers. I&#39;m sure I want the shackles/hangers for the rear, but just wondering about the front.

I just need my hand held through this since I can&#39;t seem to make my own decisions. The price is attractive for a simple coil spring drop, especially since I am a cheapass. My next choice would be to cough up for the LCAs, but I have trouble justifying LCAs since they cost twice as much.
So I&#39;m just basically asking the guys in the know that if I buy the DJM coils/shackle/hanger kit I&#39;m not going to regret it later.
[/b]

djm makes really good stuff up rfont i would try to go with either spindles or lower control arms, just to be nicer to your suspension..spings are cheaper, but it took me just about as long to install my springs up front as it did to install my spindles..the only problem i have is that after i put on my 2/4 drop it wasnt low enough so i spent more moeny to make it a 4/6 drop..now i want a 5/7 drop.....