JBA Cat4ward Headers

[gmced]

Well santa came early this year and dropped off a set of JBA Cat4ward Headers. I've read through the instructions and they seem pretty straight forward.

Just curious if anyone has run into problems installing these or is it just a simple bolt on?

Thanks,

[TxStVanWilder]

i havent done the JBA headers but we did my long tubes with a jack and some stands.... the hardest part was yanking the back spark plug to get it out of the way..... on my truck (02 w/ 5.3) we took the dipstick out for clearance during the installation....

[gmced]

<div class='quotetop'>QUOTE(TxStVanWilder &#064; Dec 20 2006, 09&#58;00 AM) [snapback]76858[/snapback]</div>

i havent done the JBA headers but we did my long tubes with a jack and some stands.... the hardest part was yanking the back spark plug to get it out of the way..... on my truck (02 w/ 5.3) we took the dipstick out for clearance during the installation....
[/b]

Thanks for the tip&#33;

[TxStVanWilder]

oh and i forgot&#33;&#33; we took the steering shaft loose on my truck... but my truck is dropped and i was doing long tubes.... i dont know if you would have to do that with shorties

[gmced]

<div class='quotetop'>QUOTE(TxStVanWilder &#064; Dec 20 2006, 10&#58;05 AM) [snapback]76866[/snapback]</div>

oh and i forgot&#33;&#33; we took the steering shaft loose on my truck... but my truck is dropped and i was doing long tubes.... i dont know if you would have to do that with shorties
[/b]

Thanks again for the tips,,, got the headers on tonight and the truck runs great. Out of the hole she feels about the same but up top she pulls way harder.