well its about to go

[TxStVanWilder]

well ive been driving around with some small transmission issues and finally they are getting worse... ill start off in 1st gear (normal driving) and either half way through or as it shifts it has a bad shudder to it..... well the truck has 110k on it and thats when my first truck's tranmission went out so ive been expecting it for a while.....

ok so now is where you guys come in.... ive got a cam 220/581-112 and headers.....
what would be a good streetable stall and what else besides the normal shift kit and servos would yall go with??? take in mind this is my daily and i drive bout 500 miles a week.....


danny tell your dad ill be at his transmission shop soon hahaha

o it has the 4l60e in it.... and im gonna stick with that one because i cant really afford an 80e

[stssilverado]

my vote for the yank tt3000. very street friendly

[Defunct SO]

If you need any trans work, my builder is very good.
He will give a 2/24 warranty on hydrolics too.
We have a few behing turbo cars that are holding great.
A low 11's cam only, 4400 stall car with over 300 passes and still going strong.
Also, no $2000 builds like other places.
4L60's, 80's, th-350 and 400, and glides.

[DBYRD]

<div class='quotetop'>QUOTE(trtturbo &#064; Oct 31 2006, 08&#58;30 PM) [snapback]71797[/snapback]</div>

If you need any trans work, my builder is very good.
He will give a 2/24 warranty on hydrolics too.
We have a few behing turbo cars that are holding great.
A low 11&#39;s cam only, 4400 stall car with over 300 passes and still going strong.
Also, no &#036;2000 builds like other places.
4L60&#39;s, 80&#39;s, th-350 and 400, and glides.
[/b]

not to steal the thread, but can he get 80e&#39;s and if so could u pm me a price?

[TxStVanWilder]

<div class='quotetop'>QUOTE(trtturbo &#064; Oct 31 2006, 08&#58;30 PM) [snapback]71797[/snapback]</div>

If you need any trans work, my builder is very good.
He will give a 2/24 warranty on hydrolics too.
We have a few behing turbo cars that are holding great.
A low 11&#39;s cam only, 4400 stall car with over 300 passes and still going strong.
Also, no &#036;2000 builds like other places.
4L60&#39;s, 80&#39;s, th-350 and 400, and glides.
[/b]

whats the name of the place/builder?? im still kinda leaning towards Sprayed99&#39;s (Danny) dad he has run a tranny shop since before i was born ..... but im open to options and suggestions

it was actually a good day no slipping or jerking while i had to drive around

[ducky]

you could always go towards an FLT tranny. ive heard lots of good things about there built trannies.