I'm looking for a driveshaft from a RCSB fullsize that had a 4l60. It's for my LS1 s10 project. I was going to have the aluminum one from my camaro lengthened but decided to just go with a steel one from a fullsize.
I'm looking for a driveshaft from a RCSB fullsize that had a 4l60. It's for my LS1 s10 project. I was going to have the aluminum one from my camaro lengthened but decided to just go with a steel one from a fullsize.
2005 Silverado SS AWD
AEM CAI, ARH LTs, HD-2 shift kit with vette servo, Circle D 278mm 3200 stall Madtunesracing.com street tune (MTR now has a Dynojet 248 chassis dyno)
13.82 @ 94.92 w/1.83 60'
Check out the salvage yards there are plenty
Most salvage yards move vehicles around with a fork lift and bend the ds the first time they pick them up.
This...plus the place I normally go to is pure mud right now. In the summer I would have been crawling around on baked clay but right now it's a big ole mess. But like Jansen said, most of the shafts are toast. Plus they don't have any trucks newer than '98 on the lot right now.Originally Posted by jansen
2005 Silverado SS AWD
AEM CAI, ARH LTs, HD-2 shift kit with vette servo, Circle D 278mm 3200 stall Madtunesracing.com street tune (MTR now has a Dynojet 248 chassis dyno)
13.82 @ 94.92 w/1.83 60'
I have one, but I am in Indiana.....it came out of a 1999 rcsb 1500
So how much shipped to 72142? Shipping should be too bad if you bubble wrap the whole thing and drop it in a box.
2005 Silverado SS AWD
AEM CAI, ARH LTs, HD-2 shift kit with vette servo, Circle D 278mm 3200 stall Madtunesracing.com street tune (MTR now has a Dynojet 248 chassis dyno)
13.82 @ 94.92 w/1.83 60'
what year model? i have mine from my 1997 with the 4l60e yoke.
1997 RCSB, AES 390 + 4L80E transplant, F1A Procharger, #160 injectors, Magnafuel 750, Schoenfield Longtubes, 3" flowmasters, Steve Morris Bullit cam, Circle D 3k stall, Ford 9" rear, Homemade Caltrac bars.
My trans is from a '99 camaro so whatever fits. I've got a bead on one now so hopefully my search is over.
Not sure where I would find a box that large? Shipping should only be $30-40
Posting Permissions
Reply With Quote