What rims u guys running In the rear for drag setup? I'm looking for another style brand ,aluminum/steel don't matter bogarts are out of discussion since I donated my old set.
What rims u guys running In the rear for drag setup? I'm looking for another style brand ,aluminum/steel don't matter bogarts are out of discussion since I donated my old set.
Even though I never go to the track I am just going to widen the 5 star 17" to 10s. Mark did that too I think
1951 3100
1984 C10
I plan on doing the same ^^^Originally Posted by ducky
03' Silverado RCSB H/C 5.3, 4L80,76mm KBracing Kit
13' Sierra Denali 2500HD CCSB 4x4
yup that is what i did, ya but doesn't do much sittin
Name: Mark,
God created turbo lag so nitrous trucks could have a chance.
http://www.ls1truck.com/forums/my-ga...tml#post274877
I'm runnin 16x8 rears with (11.5x28") 295/50's. I'm gonna change to a 16x10 to get more tread contact. They're cheap steelies from summit. A little heavy but only cost $60.
stock light weight 03 Denali 17s getting widen to 17x10, front ones getting chopped down to 17x5 in 2 weeks
So u guys are adding 2.5 inches to make it a 10? Is there enough room ? I'd like to see pics ... Cause stock rims are only 7.5 width .....I know Kevin had 18s that were made 9.5s
Would those stick out past fender well?I seen those they are nice I think duck had them
yes they are going to add spacers to fit but then again im mini tubing mine in a few months so might not need them ill post up pics also a member here posted som escalade 17s he had widened to a 17X10 its Bud8fan if im right
Last edited by 62nalide; 06-13-2012 at 06:06 PM.
They do stick out about an inch and a half. That's my only dislike. The ones with the proper backspacing were more $.
Posting Permissions
Reply With Quote
