My truck is going back to stock so im selling my engine. I bought the engine 2 years ago with close to 70k miles on it. Ran it for about a year and decided to tear it down and do a complete rebuild to freshen it up. Engine was rebuilt with all new bearings, seals/gaskets, melling oil pump, new timing set, new custom grind cam, new pushrods, valvesprings, new pistons with moly rings, arp rod bolts, arp cam and cam retainer bolts, arp flexplate bolts, ls2 lifter guides, and new ls7 lifters. The crank and rods are factory with apporx 75k miles on them.. Had the block cleaned, honed, cam bearings installed and thoroghly (spelling?) checked at the machine shop. Also had the heads milled at the machine shop... Ran the motor for a little under 800 miles and it ran flawlessly. Changed the oil at 500 miles to clean out the oil from the break in period. It made wicked power and had an awesome powerband. Power came on strong down low and pulled all the way to 7000rpm. I have all the paper work and reciepts from the rebuild and an idle/rev vid right before i pulled the motor last week
Here are some specs-
Stock ls1 block (stock 3.898 bore)
Stock bottom end
243 LS2 heads milled .010" with PAC 1518 springs
comp 7.350" pushrods
Pat G custom grind cam - 226/228 .598/.600 111lsa
I will be posting pics of the rebuild, pics of the engine and an idle rev video in the next day or so (or whenever i can get a hold of high speed internet). Asking price is $3000 OBO. I really do not want to ship but if i have to buyer will cover all shipping expenses and will be in charge of setting it up. I also have a set of f-body front drive accessories (minus the alt, and a/c compressor and bracket) i will throw in cheap if someone is interested
feel free to text me with any questions or offers 864-542-6558
SOLD
Reply With Quote