assassin traction bars?

[jetmech]

I'm considering assassin bars since I can't find appropriate hangers to mount caltracs. Who all has used assassin tracion bars? I considering using them with these hangers/shackles. Not sure if they'd work tho.

http://www.summitracing.com/parts/BEL-6512/?rtype=10

and the assassin bars

http://srdparts.com/index.php?page=s...emart&Itemid=1

[George C]

i wanted to try a set but didnt feel like waiting a few months for the next batch to be made

calvert offers a front hanger that lowers teh truck and still uses their caltracs

[phantom405]

Where did you get a few MONTHS from???

I think you could make these bars work with a lowering hanger with a little work.

[jetmech]

calvert offers a front hanger that lowers teh truck and still uses their caltracs

I tried those hangers, they didn't work. Had I used them, my truck would have been raised an inch in the rear, rather than maintaining my 4" rear drop.

[CHEVROLADE]

im sure they would work.......no wonder if the assasins would work on a flip kit

[phantom405]

They make for flip kits also if that's what you're asking

[jetmech]

No I don't have a flip kit. I currently have a DJM 2/4 drop - lower A-arms in the front and shackles/hangers in the rear. I think I found the solution tho. I checked into some belltech hangers and they have what I need. I may have to modify the hangers but they will work.

[George C]

i have teh DJM 4" in the rear. I plan to make my own so my caltracs will work