What nos setup should i do for my stock 4.8 that would be safe to run without burning my stuff up, all i have are bolt ons right now saving up for an sts turbo
4.8 nos
What nos setup should i do for my stock 4.8 that would be safe to run without burning my stuff up, all i have are bolt ons right now saving up for an sts turbo
If ur gonna go turbo, you'd be better off with a methanol system rather than NOS.....unless you can afford both
~ Forged engine of some type ~ Ball bearing turbo of an unconfirmed size ~ 4L8000 trans ~ Beefy fuel system ~
Run an easy 100 dry shot.
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
^Agreed, they're quick, simple, easy to install and when you do go turbo and don't want the nitrous anymore you can sell the kit and probably not lose your shirt on the deal.
2006 SilveradoLittle Black Bitch
jetmech your truck is my hero! btw
2009 CHEVROLET 1500 with a MONSTER 4.8 between the frame rails!!
Tuned by LSX Powersports ~ 4.10 ~ JBA Shorties ~ 4" Inlet/Outlet Spintech ~ Airaid Coldair
CST 3.5" Spindles ~ Camburg Upper Control Arms ~ 2.5" CCM ~ FFR Tie Rods
Full Throttle Suspension 3" Lift Blocks ~ Soft 8s wrapped in LT285/70/17 Silent Armors
Thanks dude! My power/torque numbers are outdated though.....I've turned the boost up since that dyno pullOriginally Posted by Chri$09
~ Forged engine of some type ~ Ball bearing turbo of an unconfirmed size ~ 4L8000 trans ~ Beefy fuel system ~
I would get a basic kit. You could do dry... but I like wet kits. Like a 78mm plate, and a reg 10# bottle. Make sure that if you do a dry kit, that your injectors can handle the extra fuel thats needed. I would run a dry shot if it were a smaller shot. But wet is generally safer. Any Ls1 plate kit can work. About any nitrous kit will work. Just get a kit with a window switch, WOT switch, wideband a/f ratio gauge, bottle warmer, and nitrous pressure gauge.
whats a good website to get a good kit for my truck
04 5.3
224/224 .566 .566 114
3200 Circle D
LT's
60e
Nelson Tuned
p1sc in closet
ebay.
Posting Permissions
Reply With Quote
