6.0 LS swap into 99 tahoe 2 dr

[Devilman]

Going to be swapping a 6.0 in my obs 2 dr tahoe. Ive found several engines. The question is, how can I identify what engine is which? I know DBW is the newer engines, but how else can I tell the difference.

I'm looking at a 6.0 that's suppose to b out of an 07 escalade. How do I tell if this is an actual L92/LY6 engine?

Thanks, Wil

[molitor]

check on the back of the blocks for casting numbers, and all of them should say 6.0l on the block as well

[Devilman]

If its the L92 head it should say 823, right?

[Devilman]

I'm going to look at an engine thats spost to be out of an 07 escalade with 34k miles on it.

What do I need to look for to determine if its actually the new 6.2l engine?

[fullthrottle]

Aluminum block and it should be stamped 6.2L on the front of the block

[all22s]

it should also be an aluminum block if it is the new 6.2 what is the vin number of the vehicle the engine came from( if you know) i can pull the vin and get all the rpo codes and everything in one shot!

[Devilman]

Went to look at the engine and it was iron block LQ4 motor. Which is fine but I didn't buy it cuz the guy just didn't seem right to me and it also was very dirty, possibly a higher mileage engine than he was claiming.

So if anybody has a good LQ4/LQ9/L92 complete engine let me know!!!

Thanks

[jerseymike68]

thanks for these information