Checklist what all is needed for a cam swap
Checklist what all is needed for a cam swap
Airaid, alpine double din,
metric ratchet set, 24mm socket, new crank bolt dealer item, springs, hardened pushrods, 2 5/16th dowl rods wooden from lowes or where ever.use air or bring the piston up to TDC so that your valves dont drop while changing springs, frluid replacement and that should be all.
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
new timing chain if you have a lot of miles...
http://i121.photobucket.com/albums/o...IMG_2118-1.jpg
1999 Silverado 1500 Z71/5.3 to LQ4 6.0 swap/ CAI/ crappy exhaust/ tuned by COWL327
What size hardened pushrods should I get?
Airaid, alpine double din,
7.4 harden pushrods...
And also A CAM!! cant forget that!!
Her name is A Meli-
"If everything is under control, you are going too slow."- MA
I got the cam lol but I only got cam n springs would the pushrods n springs and timing chain only b needed?
Airaid, alpine double din,
dont forget a Nelson Performance - Performance without Sacrificing Drivability tune.Originally Posted by Melissa@NelsonPerformance
7.4 harden pushrods...
And also A CAM!! cant forget that!!
Also get coolant, and always make sure a local parts store is open. You WILL make a trip or two.
Garrisson got close.
8mm, 10mm, 13mm, 15mm sockets (short and deep)
Spark plug socket
LS1 style valve spring compressor
Pliers
24mm socket for crank bolt
Heavy duty 3-jaw pulley puller
Kerosene torch (for heating up crank pulley to get back on nose of crank)
Small pick (for tranny cooler lines)
Slot head screwdriver
Torque wrench
5 lb bag of Kitty Litter
6 quarts oil and filter
1 gallon of Dexcool coolant
Timing chain (depending on mileage)
Crank Bolt
Water Pump gaskets (depending on mileage and condition)
I think that's it.
If you don't have a compressor, you can use the TDC method for the springs...
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
Posting Permissions
Reply With Quote
