+ Reply to Thread
Results 1 to 9 of 9

Thread: 4 spd auto floor shifter for 1500

  1. #1
    Join Date
    Apr 2009
    Location
    Richardson
    Posts
    151

    4 spd auto floor shifter for 1500

    I was wanting to install a floor shifter, my truck has the center console w/ drink holders, i want to get rid of the holders & put the shifter there....has anyone done that or have any info...also a after-market auto 4 sp shifter..
    2000 sil.ext. 5.3 / Lingenfelter Ls1 cam / LS1 valves / Ported / Milled / 35lb injectors / 80mm tb / E-fans / cold air intake / Pacesetter Cer LT's w/3"ory/ JET-DST / MSD Twister / Corvette Servo / 3.73's / 125 N2O / no cats / Flowmaster exhaust / level rear drop / Rear sway bar / SS wheels / 285/50R20 Goodyears / 05 Tail lites

  2. #2
    Join Date
    Nov 2007
    Location
    Pittsburgh, PA
    Posts
    3,581
    a few have done it but if your running a electronic controlled tranny there is no reason to manually shift it.

  3. #3
    Join Date
    Apr 2009
    Location
    Richardson
    Posts
    151

    Wink

    Quote Originally Posted by Quik View Post
    a few have done it but if your running a electronic controlled tranny there is no reason to manually shift it.
    I didn't say anything about manually shifting, I just would like to have the shifter on the floor....(dare to be different)
    2000 sil.ext. 5.3 / Lingenfelter Ls1 cam / LS1 valves / Ported / Milled / 35lb injectors / 80mm tb / E-fans / cold air intake / Pacesetter Cer LT's w/3"ory/ JET-DST / MSD Twister / Corvette Servo / 3.73's / 125 N2O / no cats / Flowmaster exhaust / level rear drop / Rear sway bar / SS wheels / 285/50R20 Goodyears / 05 Tail lites

  4. #4
    Join Date
    Aug 2007
    Location
    Honeywood, Ontario
    Posts
    6,994
    a shifter for a 700r4 will work
    2006 Silverado
    Little Black Bitch

  5. #5
    Join Date
    Nov 2007
    Location
    Pittsburgh, PA
    Posts
    3,581
    well when the time comes for me to be auto again i was planning on trying to use the tbss shifter and fabb'in it to work with my console currently as i do now for my 6spd.

    i havent seen one aftermarket shifter thta is tasteful that is worth putting in a "non-race" vehicle.

  6. #6
    Join Date
    Aug 2007
    Location
    Honeywood, Ontario
    Posts
    6,994
    Quote Originally Posted by Quik View Post
    well when the time comes for me to be auto again i was planning on trying to use the tbss shifter and fabb'in it to work with my console currently as i do now for my 6spd.

    i havent seen one aftermarket shifter thta is tasteful that is worth putting in a "non-race" vehicle.
    Lokar has some nice ''non-race'' ones but they don't suit our trucks, you could go electronic push button, thats a little pricey though.
    2006 Silverado
    Little Black Bitch

  7. #7
    Join Date
    Apr 2009
    Location
    Richardson
    Posts
    151
    I looked at hurst and b&m, never could find anything.....thanks
    2000 sil.ext. 5.3 / Lingenfelter Ls1 cam / LS1 valves / Ported / Milled / 35lb injectors / 80mm tb / E-fans / cold air intake / Pacesetter Cer LT's w/3"ory/ JET-DST / MSD Twister / Corvette Servo / 3.73's / 125 N2O / no cats / Flowmaster exhaust / level rear drop / Rear sway bar / SS wheels / 285/50R20 Goodyears / 05 Tail lites

  8. #8
    Join Date
    May 2009
    Location
    Farmington, MN
    Posts
    154




    Here's the tow/haul a$$ button:

    2000 Sierra rcss, LS6, xr265hr-15, HP Tuner, B&M, traction, cai, 2-4, 3.73 G80, Centerline, Pacesetters w/custom pipes and mufflers

  9. #9
    Join Date
    Jan 2008
    Posts
    8,031
    i ran the b-m hammer shifter in my old truck,any 700r4 shifter will work,you will just need to relocate to tow/button.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts