+ Reply to Thread
Results 1 to 6 of 6

Thread: FINALLY! the Radix is in!

  1. #1
    Join Date
    Apr 2004
    Posts
    231

    ^^^^^^^^^^^^^^^^
    That's what my 2500HD does from a rolling 5mph at 3/4 throttle

    Hot Damn B! This beatch flat out pulls hard!
    You should have seen the wife's neck the first time I laid into the throttle with her in the truck.
    I don't know what to say except, HELLS YES!!!!!!
    There's power everywhere, and I mean everywhere, no lag, no hesitation, just flat out POWER!!
    On a 1/4 throttle 1-2 shift she used to wean a bit (i.e. low rpm, higher gear), now she just pulls and pulls hard. My 2-3 shift will set you back in your seat
    I can spin these 32" tires just as long as want, no shit, I need traction bad now. I don't even know what kind of 0-60 I can get with all the wheel spin!
    Fucking thing idles stock! and absolutely Screams when the gas is mashed!!!
    I think I need another test drive....... ................there is so much off idle power I have to actually be somewhat careful.
    2 12" wide strips of rubber are hangin out on a street near you complements of my HD

    Now, I have to say thanks to Magnuson/Magnacharger, Project R, and Brian Zacuto for a great product and great customer service, and a thank you, to NakedAV, for helping me set the huffer in gently

    Also, I should note, that Brian has taken care of me, very well, for various reasons and at no cost to me. I'll need to buy him/you a beer
    but sincerely, thanks!

    Now, if anyone is on the fence, let me put it this way................my 5500lb. truck feels like a sports car in terms of acceleration
    where's that SRT10 when you need him.

    Now, it would seem, I have a HUGE! traction problem, and HUGE HP/TQ increase!!!............ I can't stop smiling...................... Radix
    2005 Chevrolet Silverado 2500HD ECSB 2WD
    365 CID motor built by "Rex", Magnuson TVS 2300,WCCH StageII LQ9 heads, EDC Cam, SW Headers, Magnaflow Exhaust, CPT 4L80E, PI 2800 TC, TRACK: Real Racing 16x12 wheels, M&H DOT Cheater Slicks, STREET: Intro Pentia 8 20x10 wheels, BFG KDW's
    2008 Nissan Frontier KC VQ40 V6 AUTO 2WD.....Daily Driver
    2002 Honda CBR954RR


  2. #2
    Join Date
    Apr 2003
    Location
    Mansfield, Texas, USA
    Posts
    2,462
    You appear just a bit excited!

    Glad to hear it's finally installed and blowing like it's supposed to.
    The superior man is modest in his speech, but exceeds in his actions. - Confucius

    "He who asks of life nothing but the improvement of his own nature, is less liable than anyone else to miss and waste life."- Henri Frederic Amiel

    '01 Chev Z71 LT - '85 BMW 745i TURBO - '88 BMW 750iL - '88 Ford F150 XLT Lariat - '79 MB 240D - '79 MB 280S Euro
    '80 MB 380SE-5.0 Euro - '85 MB 300SD - '87 MB 300SDL - 1990 MB 300SEL - '91 MB 300SE - '91 MB 560SEL

    Let's face it, the red hair... makes 'em wet.


  3. #3
    Join Date
    Jun 2004
    Location
    george west texas
    Posts
    3,694
    congrats man...like jerry told me the other day...get you some old tires on there and have fun
    '13 silverado LT...stock

    '11 lt 4x4 z71..tvs1900

    '01 gmc twins 6.0 jakes 400 ladder bars w/ coilovers tuned by nelson performance

  4. #4
    Join Date
    Apr 2004
    Posts
    231
    Originally posted by Hit Man X@Dec 27 2004, 02:02 AM
    You appear just a bit excited!

    Glad to hear it's finally installed and blowing like it's supposed to.
    just a tad!

    Thanks HitMan!
    2005 Chevrolet Silverado 2500HD ECSB 2WD
    365 CID motor built by "Rex", Magnuson TVS 2300,WCCH StageII LQ9 heads, EDC Cam, SW Headers, Magnaflow Exhaust, CPT 4L80E, PI 2800 TC, TRACK: Real Racing 16x12 wheels, M&H DOT Cheater Slicks, STREET: Intro Pentia 8 20x10 wheels, BFG KDW's
    2008 Nissan Frontier KC VQ40 V6 AUTO 2WD.....Daily Driver
    2002 Honda CBR954RR


  5. #5
    Join Date
    Apr 2004
    Posts
    231
    Originally posted by bud8fan@Dec 27 2004, 05:03 AM
    congrats man...like jerry told me the other day...get you some old tires on there and have fun
    I do have the stockers
    2005 Chevrolet Silverado 2500HD ECSB 2WD
    365 CID motor built by "Rex", Magnuson TVS 2300,WCCH StageII LQ9 heads, EDC Cam, SW Headers, Magnaflow Exhaust, CPT 4L80E, PI 2800 TC, TRACK: Real Racing 16x12 wheels, M&H DOT Cheater Slicks, STREET: Intro Pentia 8 20x10 wheels, BFG KDW's
    2008 Nissan Frontier KC VQ40 V6 AUTO 2WD.....Daily Driver
    2002 Honda CBR954RR


  6. #6
    Join Date
    Mar 2004
    Location
    Springfield
    Posts
    473
    Always nice to have a little extra power under the hood.
    Now put it to good use and kill some Hemis and Fords.
    FOR ALL YOUR WHEEL, TIRE, AND ACCESSORY NEEDS
    CONTACT: EPLEY'S TOUCH OF CLASSIC 1-270-843-6892
    OR TO GET ME PERSONALLY CALL: 1-615-943-6514



    2000 Chevy Silverado 4.8L RCSB: smoked UPD, Flowmaster exhaust, De-screened MAF, Nelson 93 hot tune. Upcoming installs: trans-go shift kit, Eaton posi, billet servo, ported and polished throttle body...Near future: 6.0/4L80E install with 150 wet shot

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts