Many moons ago I posted that my 03 1500HD's stock torque converter flashed stalled and brake stalled @ 2500rpms.
Just reporting back in that my 05 2500HD's stock torque converter does the same. Might be a less expensive alternative for some
Many moons ago I posted that my 03 1500HD's stock torque converter flashed stalled and brake stalled @ 2500rpms.
Just reporting back in that my 05 2500HD's stock torque converter does the same. Might be a less expensive alternative for some
2005 Chevrolet Silverado 2500HD ECSB 2WD
365 CID motor built by "Rex", Magnuson TVS 2300,WCCH StageII LQ9 heads, EDC Cam, SW Headers, Magnaflow Exhaust, CPT 4L80E, PI 2800 TC, TRACK: Real Racing 16x12 wheels, M&H DOT Cheater Slicks, STREET: Intro Pentia 8 20x10 wheels, BFG KDW's
2008 Nissan Frontier KC VQ40 V6 AUTO 2WD.....Daily Driver
2002 Honda CBR954RR
Pretty nice... get the ol' Radix on there and it should flash a tad higher due to the increase in input torque.
The superior man is modest in his speech, but exceeds in his actions. - Confucius
"He who asks of life nothing but the improvement of his own nature, is less liable than anyone else to miss and waste life."- Henri Frederic Amiel
'01 Chev Z71 LT - '85 BMW 745i TURBO - '88 BMW 750iL - '88 Ford F150 XLT Lariat - '79 MB 240D - '79 MB 280S Euro
'80 MB 380SE-5.0 Euro - '85 MB 300SD - '87 MB 300SDL - 1990 MB 300SEL - '91 MB 300SE - '91 MB 560SEL
Let's face it, the red hair... makes 'em wet.
2005 Chevrolet Silverado 2500HD ECSB 2WD
365 CID motor built by "Rex", Magnuson TVS 2300,WCCH StageII LQ9 heads, EDC Cam, SW Headers, Magnaflow Exhaust, CPT 4L80E, PI 2800 TC, TRACK: Real Racing 16x12 wheels, M&H DOT Cheater Slicks, STREET: Intro Pentia 8 20x10 wheels, BFG KDW's
2008 Nissan Frontier KC VQ40 V6 AUTO 2WD.....Daily Driver
2002 Honda CBR954RR
Well flash higher provided those donut-looking 245/75R16s can hookup on the street from a launch.
What did you decide upon the TransGo setup? SK, vac mod, sep plate, and B&M cooler?
The superior man is modest in his speech, but exceeds in his actions. - Confucius
"He who asks of life nothing but the improvement of his own nature, is less liable than anyone else to miss and waste life."- Henri Frederic Amiel
'01 Chev Z71 LT - '85 BMW 745i TURBO - '88 BMW 750iL - '88 Ford F150 XLT Lariat - '79 MB 240D - '79 MB 280S Euro
'80 MB 380SE-5.0 Euro - '85 MB 300SD - '87 MB 300SDL - 1990 MB 300SEL - '91 MB 300SE - '91 MB 560SEL
Let's face it, the red hair... makes 'em wet.
haven't decided yet, check this thread out and let me know what you think.
http://www.ls1tech.com/forums/showthread.php?t=242274
I emailed Hughes for a pre-fabbed valve body......no response yet
2005 Chevrolet Silverado 2500HD ECSB 2WD
365 CID motor built by "Rex", Magnuson TVS 2300,WCCH StageII LQ9 heads, EDC Cam, SW Headers, Magnaflow Exhaust, CPT 4L80E, PI 2800 TC, TRACK: Real Racing 16x12 wheels, M&H DOT Cheater Slicks, STREET: Intro Pentia 8 20x10 wheels, BFG KDW's
2008 Nissan Frontier KC VQ40 V6 AUTO 2WD.....Daily Driver
2002 Honda CBR954RR
The Lightning ones (E4OD/4R100) is just a front accumulator body by the stator pump, I built one in about 30 min. lol It's NOTHING at all like the 80E {:-(
Their VB's three parts stacked together, theres a big lower part and two smaller ones on top. Very simple, and very effective. There is no complexity to that unit.
Here's the sep plate - http://www.transmissionpartsusa.com/4L80E_...0-004681301.htm
Should be the same for the new ones too.
The superior man is modest in his speech, but exceeds in his actions. - Confucius
"He who asks of life nothing but the improvement of his own nature, is less liable than anyone else to miss and waste life."- Henri Frederic Amiel
'01 Chev Z71 LT - '85 BMW 745i TURBO - '88 BMW 750iL - '88 Ford F150 XLT Lariat - '79 MB 240D - '79 MB 280S Euro
'80 MB 380SE-5.0 Euro - '85 MB 300SD - '87 MB 300SDL - 1990 MB 300SEL - '91 MB 300SE - '91 MB 560SEL
Let's face it, the red hair... makes 'em wet.
Posting Permissions
Reply With Quote
