+ Reply to Thread
Results 1 to 5 of 5

Thread: Cam Recommendation Needed

  1. #1
    Join Date
    Apr 2004
    Posts
    231
    I want good idle, tons of power with stock torque converter.

    What its going in:

    5500lb truck
    6.0L
    4L80E
    4.10's
    32" tires
    Radix Blower
    TOG Headers
    Magnaflow Cat Back

    thanks in advance.....been researching awhile
    2005 Chevrolet Silverado 2500HD ECSB 2WD
    365 CID motor built by "Rex", Magnuson TVS 2300,WCCH StageII LQ9 heads, EDC Cam, SW Headers, Magnaflow Exhaust, CPT 4L80E, PI 2800 TC, TRACK: Real Racing 16x12 wheels, M&H DOT Cheater Slicks, STREET: Intro Pentia 8 20x10 wheels, BFG KDW's
    2008 Nissan Frontier KC VQ40 V6 AUTO 2WD.....Daily Driver
    2002 Honda CBR954RR


  2. #2
    Join Date
    Sep 2004
    Posts
    665
    Here's a site a found with a ton of cam information. I hope it helps.

    Fast Truck Cam Page

    There are a ton of choices. It's hard to pick the exact one.
    No more trucks, but this is what I used to have. 2000 GMC Sierra, 6.0L-LQ4, Built 4L60, LS6 Cam, The Other Guys Headers, 3 inch exhaust and 7 chamber flowmaster, 43lb injectors, Nelson Tuning, Drop - 3/4 McGaughys Spindles, Bell Tech Shackles & Hangers. Best time 13.59 @ 106

  3. #3
    Join Date
    Apr 2003
    Location
    Mansfield, Texas, USA
    Posts
    2,462
    What sort of powerband you looking for... ?
    The superior man is modest in his speech, but exceeds in his actions. - Confucius

    "He who asks of life nothing but the improvement of his own nature, is less liable than anyone else to miss and waste life."- Henri Frederic Amiel

    '01 Chev Z71 LT - '85 BMW 745i TURBO - '88 BMW 750iL - '88 Ford F150 XLT Lariat - '79 MB 240D - '79 MB 280S Euro
    '80 MB 380SE-5.0 Euro - '85 MB 300SD - '87 MB 300SDL - 1990 MB 300SEL - '91 MB 300SE - '91 MB 560SEL

    Let's face it, the red hair... makes 'em wet.


  4. #4
    Join Date
    Apr 2004
    Posts
    231
    Originally posted by Hit Man X@Nov 20 2004, 07:28 PM
    What sort of powerband you looking for... ?
    somewhere low - 6000rpm w/ a little over rev.
    2005 Chevrolet Silverado 2500HD ECSB 2WD
    365 CID motor built by "Rex", Magnuson TVS 2300,WCCH StageII LQ9 heads, EDC Cam, SW Headers, Magnaflow Exhaust, CPT 4L80E, PI 2800 TC, TRACK: Real Racing 16x12 wheels, M&H DOT Cheater Slicks, STREET: Intro Pentia 8 20x10 wheels, BFG KDW's
    2008 Nissan Frontier KC VQ40 V6 AUTO 2WD.....Daily Driver
    2002 Honda CBR954RR


  5. #5
    slowverado Guest
    the first cam i had could be something like you are looking for...it was 216/218 duration with .535/5.35 lift on a 112 LSA...you could bump it to a 114 LSA if you wanted to and it would still be a killer cam. i ran it with stock tune for a while and it was very powerful, with a good tune and supporting mods is will be a great performer.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts