I need stuff in writing or I forget. Looking for recommendations on a cam for a turbo setup...
Sorry - this is my online note taking area:
Per Virgil: 212/222 .56x lift 114+lsa
LS6 cam is: 204/218 int/exh @ 0.05" duration
0.551" / 0.547" int/exh lift
117 LSA
Last edited by DamnYankee; 05-23-2008 at 07:16 PM.
Why not try what you have and see what happens.
99RCSB Broke because I wasted thousands and thousands of dollars on my truck.
You should run foggys cam. Its a real nice one, and im going to be running it in my setup. Its the 220. You can also run the zo6 cam. Alot of guys with reg cabs run that
1951 3100
1984 C10
Yeah...Billy was saying the LS6 cam...
Which cam would be a better turbo cam: 216/224 .565/.585 116 lsa or 215/231 .631/.644 118 lsa
I say GT2-3.
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
I run the 220/220 .581 .581 on a 115. It has good drivable manners and a mountain of tq.
12 Sec. Club! SOLD
La Viuda negra/ a.k.a. Black Betty
LQ4 6.0L, WCCH HEADS, LEVEL 5 FLT 4L80E TRANS. WITH TRANS BREAK, YANK 3200 STALL, TRICK TURBO, TURBONETICS T-76 TURBO, CUSTOM INTERCOOLED, 68lb INJECTORS, CUSTOM S/D TUNE FROM NELSON PERFORMANCE, COMP CAM 212/214 .557/.559 116+2, SNOW METH. KIT, . ALL INSTALLED AND DYNOED AT NELSON PERFORMANCE: 5**?HP @ 5073rpms and 5**TQ @ 4389rpms AT THE WHEELS WITH 10 PSI OF BOOST. ALL 3/4 TON TRUCK 5435LBS, NOTHING TAKEN OFF, STREET TIRES, AND USUALLY 2 BABY SEATS. WANNA RIDE?
SOLD***
you guys with turbo's make me sick..
Posting Permissions
Reply With Quote
