The servo cover has poped to one side and the snap ring is
still in.It broke half the retaner off,from the bottom snap ring
access point to the top.So what are my opptions now?
And what do yall think caused this?
The servo cover has poped to one side and the snap ring is
still in.It broke half the retaner off,from the bottom snap ring
access point to the top
And what do yall think caused this?
2000 SWBRC 5.3,radix,e-fans,no cats,true duels
2 21/2in delta force race muffs,4.10 with eaton
e-locker.Descreened MAF & throttlebody bypass.
FLP level 5 4L65E,PI 3000 stall,Dynatech headers
Nelson tune
2005 GMC 2500HD 4door 4x4
1989 Chevy Suburban 4x4 ( Sir Leaks-a-Lot )
Are there enough retainers to hold the snap ring in?
Check for scuffing or scaring on the servo or walls, make sure there is no damage, can you reinstall it.
allen
Nelson Performance
FastestTruckList.com
NP on Facebook
Youtube Channel
'94 Chevy Truck: 8.9 et, 408 twins
If you get the overdrive servo, it comes with a new piston and cover.
Arrival Blue 2003 Chevy Silverado RCSB (stepside) w/ 5.3 and an exhaust leak.
Posting Permissions
Reply With Quote
